With them you can achieve concrete walls, monolith type. Polystyrene is produced at a density of 24 kg / m.
Thick concrete wall can be 15, 20 and 25 cm.
Casings are straight or corner at an angle of 45 or 90 degrees right or left. Have size 122 x 40.60 cm.
Embedded hard plastic clamps are placed at 152 mm from each other, have 7 support for reinforcing openings, 3 horizontal bars can receive up to be 16 mm.
The factory can produce expanded polystyrene boards with densities between 7-45 kg / cm, thickness of 2-50 cm.
Amvic walls provide extra sound insulation of 50 dB.
If you want to insulate the house, polystyrene thickness must be at least 10 cm, for the freezing point to be at least between the wall and polystyrene.
In a house with a living area of ​​100 square meters, average energy consumption is 400 kWh / sqm / year. If its isolation, consumption drops to 80 kWh / sqm / year, there was a saving of 80%.
Fire is 3 hours. If you house and put Amvic walls and extra insulation, insulation reach <0.15 w / m² k, ie "Passive House"!

Houses were made in AMVIC system:
- Increased energy efficiency. In Romania is estimated a 50% or more of the required annual energy costs for heating / cooling (air conditioning) compared to similar houses made with conventional construction methods;
- More silence. Penetration from the outside noise is substantially reduced;
- Sustainable. Homes AMVIC system, concrete, no rot, no decay or isipierd integrity while building as happens with traditional wood or other material. Future maintenance costs are substantially reduced;
- Quality. A house built of formwork AMVIC has a high quality of coating and stucturii;
- Lower cost than a traditional house system, but with the same thermal insulation by 15-20%;
- Any manufacturer can do. The construction AMVIC system is radically different in practice from conventional construction. Entrepreneurs can learn repede.Necesitatile tool carriers are very little changed;
- Green building. The main element of any green building energy efficiency and sustainability. The two combined to minimize long-term impact on the environment structure. plus save trees during construction to achieve;
- Violent fire resistant. A concrete house, along with other items of protective measures against fire and set of regulations is the best possible protection against damage caused by fires burning;
- Resale value protected. while energy costs continue to rise, prices of resale homes will be influenced by their relative energy efficiency.

For example, the slab Amvic advantages:
- Execution time than 5-7days;
- Economy of timber;
- Economy of nails, staples, wire, etc..;
- Manapora is greatly reduced because mold beams and floor panels form is made from polystyrene;
- Shuttering boards do not come in contact with cement and can be reused for other works.

Differences with a home made in the classical system:
Faster = Being a LEGO building type, execution speed increases (2 people can one day build up to 100 square meters of external wall)
May Thermal Insulation upper = .22 to .27 W / m K
= 15-20% cheaper than a house built in the classical system, but with the same insulation.